Oil Heaters

Forget the furnace.  Dump the ductwork.
Skip the trip to the cellar

The high efficiency direct-vent oil heating system is here!

Model: OM-22 Vented Heater

Now you can heat your home for less  -  for less money, in less space, with less work than ever before.

The revolutionary Toyotomi Oil Miser is the perfect way to make your current home warmer, or heat a new addition. The OM-22 can be used either as a supplement to an existing system or as a primary heat source for additions, basements, garages, and even seasonal cottages.  You'll save a bundle year after year, thanks to the Oil Miser's unbeatable 90% efficiency.

Toyotomi has been using direct-vent technology in its heating systems for over 30 years.  It has proven to be not only highly efficient, but also safe and reliable.

In addition, the OM-22 Oil Miser operates on north America's most popular oil product, #2 home heating oil.

bulletHeats up to 1000 square feet...but uses only two square feet of floor space!
bulletSealed, direct-vented system means no drafts, no chimney, no special ductwork, or construction!
bulletSafe: UL, CUL, home and mobile home approved!
bulletEasy to operate
bulletThermostatically controlled

Specifications for Model: OM-22 Vented Heater

Ignition: Porcelain Igniter
Fuel Type: No. 2 Fuel Oil (Typical Home Heating Oil)
or No. 1 Fuel Oil (ASTM D396)
Efficiency: 90%
Heat Rating: High - 22,000 BTU/hr
Med - 15,000 BTU/hr
Low -   8,000 BTU/hr
Fuel Consumption: High - 0.173 gal./hr
Med - 0.116 gal./hr
Low - 0.060 gal./hr
Fuel System: Oil tank - Existing tank or purchase tank from Bill Straight
Dimensions: 19-5/8" (W) x 23-3/4" (H) x 16-1/2" (D)
Weight: 38 lbs. (Empty)
Vent Pipe Hole: 2-3/4" - 3" (Diameter)
Maximum Length of Flue Vent Pipe System 10 ft., 3 bends or less
Electrical Rating: 120 Volts  AC. 60Hz
Preheat: 275 Watts
Burning:  46 Watts
Required Accessories: In-line fuel filter
Safety Devices: High limit bi-metal switch
Flame sensor
Blower motor sensor
Fusible link valve
Typical Room Size  (0F Heat Load = 24 BTU/ft/h)
                             (20F Heat Load = 20BTU/ft/h)
960 square feet (0F)
1,150 square feet (20F)

Hot Water Heater Model OM-148

You'll never run out of hot water again with the Oil Miser On-Demand Hot Water heater!

It heats as much water as you could ever want, when you want it, using economical, reliable #2 home heating oil.

The Toyotomi water heater is on-demand which means there is no costly storage of hot water when it is not needed.  And like all Oil Miser products, it's safe, reliable and easy to install.

Shower yourself with savings year after year.  Ask Bill Straight about the Oil Miser Water Heater today.

bullet

Heats the water you need, when you need it...up to 240 gallons per hour!

bullet

Saves hundreds of dollars per year (average payback: just 30 months!)

bullet

Stainless steel heat exchanger!

bullet

88% efficient!

bullet

Safe: UL, CUL, home and mobile home approved!

bullet

Direct vent (as shown below) or chimney vent!

Specifications for Model: OM-148 Water Heater

Ignition: High Voltage Discharge Spark
Fuel Type: No. 2 Fuel Oil (Typical Home Heating Oil)
or No. 1 Fuel Oil (ASTM D396)
Efficiency: 98%
Heat Rating: 148,000 BTU/hr
Fuel Consumption: 1.05 gal./hr
Fuel System: Oil tank - Existing tank or purchase tank from Bill Straight
Maximum Hot Water Temperature: 6.1 gal./min (40F rise)
4.8 gal./min (50F rise)
4.0 gal./min (60F rise)
3.5 gal./min (70F rise)
3.0 gal./min (80F rise)
Capacity of heat Exchanger: 5.1 gal
Dimensions: 12-5/8" (W) x 27-3/4" (H) x 22-1/2" (D)
Weight: 86 lbs. (Empty)
Vent Pipe Hole: 4-3/4" (Diameter)
Maximum Length of Flue Vent Pipe System 10 ft., 3 bends or less
Maximum Length of Chinmney 26 ft.
Electrical Rating: 120 Volts  AC. 60Hz
Ignition: 120 Watts
Burning:  98 Watts
Required Accessories: In-line fuel filter
Temp & pressure relief valva
Flue pipe installation kit or
Chimney installation adapter kit
Safety Devices: Over-heat protector
Ignition safety device
Empty burning protective device
Heat exchanger bi-metal switch
Temperature fuse, Fusible link valve